Taylor Made Hull Gard Double-Eye Oval Boat Fender for 35' to 50' Long Boats - White Vinyl

Video Transcript for Review of Taylor Made Boat Bumpers - Hull - 3691024

Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this Taylor Made White Vinyl Hull Guard Double-Eye Oval Boat Fender for 35 foot to 50 foot long boats. Now, this is an inflatable utility fender that'll hang from your boat to prevent damage to the hull. It does cushion impacts with docks, mooring buoys, or other boats, and you can see it's a nice oval shape that keeps the fender from rolling out of position when it's pressed against the dock. Does use the reinforced molded eyelets on each end you can see here. This will connect to your fender lines without tearing, and the fender lines are not included, those are sold separately.

This is a nice white vinyl. It is more durable and abrasion-resistant than rubber. It is made in the USA.Few specs on this again. The application, this is for 35 foot to 50 foot long boats. The fender dimension, from this end to this end, is 30 inches.

Diameter of it is 10-and-a-half inches. Inflation pressure rating on this is one-and-a-half PSI. And there's your inflation valve. It uses a molded-in inflation valve seat right here, which is harder to tear off than a glued valve seat. Basically, you just take a pump with a needle, stick it in there, pump it with one-and-a-half PSI, and you'd be all ready to go.But that should do it for the review on this Taylor Made White Vinyl Hull Guard Double-Eye Oval Boat Fender for the 35 foot to 50 foot long boats..